[Jetson Nano] Arducam 18MP AR1820HS Color Camera Module for Jetson Nano
Arducam 18MP AR1820HS Color Camera Module for Jetson Nano
Item Description:
As part of Project Jetvariety, which allows any camera modules to be connected to the high-speed CSI-2 connector on the Jetson Nano. Arducam released this 18MP AR1820HS camera module for Jetson Nano. It incorporates ON Semiconductor 1/2.3−inch CMOS active−pixel digital imaging sensor AR1820HS with 1.25um x 1.25um A-PixHS™ BSI Pixel and can support 18-megapixel (4912H x 3684V) digital still images at 24 fps and a 1080p plus additional 27 percent pixels for electronic image stabilization (2448H x 1378V) in digital video mode at 60 fps and 1080p120 fps.
Features:
- Optical format 1/2.3−inch (4:3)
- Active pixels 4912H x 3684V
- Pixel size 1.25um x 1.25um
- Color filter array RGB Bayer pattern
- ADC resolution 12−bit, on−chip
- Responsivity 0.62 V/lux−sec (545 nm)
- Dynamic range 65.8 dB
- SNRMAX 36.3 dB
- Output Interface 4-Lane MIPI
- Frame Rate 4:3 – 18 Mp full resolution at 15 fps (MIPI-4L)
- 16:9 – 14 Mp at 20 fps (MIPI-4L)
- 16:9 – 8 Mp at 30 fps (MIPI-4L)
- 16:9 – Full HD + 27.5%EIS at 60 fps
- 16:9 – Full HD at 120 fps
- Lens Default: low distorion M12 lens (Part Number: M27280M07S)
- IR Sensitive build-in 650nm IR filter, none sensitive to IR light
Driver Features:
- Support RAW8/10 bayer format.
- Support Standard V4L2 framework, Video Nodes and Controls (Exposure, Gain and depending on camera parameters)
- Support Single Line Driver Installation Command
- Support OpenCV Friendly and Provides Source Code Demonstration
Application:
- Digital video cameras
- Digital still cameras
- Industrial camera
- Medical camera
- Microscopy camera
- UAV camera
Documentation
Product status
B0216 |